A M Metal Specialties Inc

Dilution ventilation reduces dust and contaminates by pulling in clean air and expelling contaminated air. This kind of system is generally less expensive and can be used for large or small areas.

There are a number of common heavy-duty machines, including CNC machines, that use a coolant to ensure that cutting tools do not overheat. The combination of the cutting action and the coolant releases an oil mist that must be properly ventilated for safety reasons.

One type of HVAC filter is the electrostatic filter. Essentially, these types of air filters create a self-generated charge, which helps to collect dust particles and hold them using a weak electrostatic attraction.

Heat from industrial machines gets easily trapped in water vapor which consequently increases the emissions from the machines. Emissions can take the form of dangerous chemical fumes, a health hazard to workers. Industrial ventilators are used to reduce carbon-emissions and excess chemical fumes as well as other contaminants.

Proper ventilation takes more than simply acquiring a fan, although fans can be used to absorb heat. Industrial air filtration also pulls dust and fumes out of your workspace and into a collector, leaving a cleaner environment behind.

What's the difference between dilution ventilation and local exhaust ventilation? Dilution ventilation essentially dilutes the contaminated air by blowing in clean air while exhausting some of the dirty air, while local exhaust ventilation captures contaminants at or near the source and completely exhausts them outside.

Are your workers exposed to machine oil mist? According to the Centers for Disease Control, this mist is a liquid aerosol that hangs in the air like tobacco smoke and has been connected with a number of serious conditions, including cancer.

Overexposure to lead is one of the most common problems in industry and is the leading cause of workplace illness, especially in construction. OSHA has made the reduction of lead exposure a top priority and industrial ventilation is highly recommended in order to reduce the risk, not to mention liability.

Breathing airborne toxins can cause long-term health problems but so can eating them! Some pollutants, like mercury, benzene and uranium (to name just a few) can deposit into the ground or surface waters. These toxins can be absorbed by plants and animals, causing problems up through the food chain right to your dinner table!

We can supply waterjet cutting services for your company that will enable you to cut virtually any product - even metal up to six inches thick - in an environmentally safe way.

When it comes to controlling air quality in an industrial environment, industrial ventilation is your best bet. This can be used to remove everything from welding fumes and solvent vapors, to oil mists and dusts.

Did you know that according to indoor air quality experts, filtration and ventilation are two of the most effective ways of eliminating harmful pollutants and improving overall indoor air quality?

When it comes to choosing the right ventilation system for your particular industrial setting, a major factor is going to be what contaminants you are trying to control. For instance, a dilution ventilation system is effective for flammable or combustible gases or vapors but is going to be ineffective for dusts or metal fumes.