Clark Well Drilling

Positive displacement pumps actually have a fixed displacement volume. Essentially, this means that the flow rates they generate depend on how quickly they are operating, and the pressures they generate are determined by the system’s resistance to this flow.

Why does ice float in water if it is made of water? Water expands by 9% when it freezes, so ice is lighter than water.

Two good pump choices for high pressure application are the piston pump or plunger pump. These positive displacement pumps both use similar action, but the plunger pump uses single-action plungers while the piston pump uses double action pistons. A pump specialist can help match the right one to your needs.

If you have had a new well installed on your property then consider getting it tested. Having your well professionally tested is the only way to establish that your water is healthy and free of pesticides, heavy metals, and organic chemicals.

What is Bernoulli’s principle? This is the scientific principle, identified by mathematician Daniel Bernoulli in the early 1700s, which is applied to the science of flowing liquids and is still today a very important consideration for water pump designs.

Bearings and related components, including lubricants and sealing systems, are important factors in maximizing pump performance by increasing pump flow and head. Determining the best system for your business is key to ensuring the best pumping results.

Multistage jet pumps are designed for use in wells deeper than 25 feet. Typically, they contain at least two impeller or centrifugal pumps that force water through a narrow opening to constrict the flow, accelerate movement, and increase suction.

When you think of a pumping system, it’s easy to just concentrate on the pumps, but there’s a lot more to it than the pumps. All of the components have to work perfectly together, and the best way to do that is by having them installed by a pumping specialist.

A well pump located too close to the water surface won’t operate properly. It’s also subject to cavitation, a condition that occurs when the flow rate is too high or the pipe size is too small, either of which can cause vapor bubbles to form.

Centrifugal pumps are one of the most common type of industrial pump used today. That is because they come with a number of different possible configurations available, including fire pumps, chopper pumps, grinder pumps, magnetic drive pumps, end suction pumps, and many more.

If the well pump is short cycling, it needs to be checked and repaired or replaced as necessary. Short cycling puts undue strain on the motor, causing it to overheat and wear out well before the natural end of its service life, adding to the expense.

Basically, pumps have two main purposes. They are either used to transfer liquid from one place to another place, or they are used to circulate liquids (such as cooling water or lubricants) around a system.

Despite the convenience that it brings, wells aren't always the safest of water sources. This is because they may contain harmful substances and pathogens. As such, you should filter or otherwise treat any well water before you use it.