Greg Leiby Seal Coating & Line Painting, LLC

Tire Marks on the Surface of the Sealer is both Normal and Temporary: DONT' PANIC: when temperatures and humidity levels rise, the sealer can flash dry upon application. When the sealer is applied on a hot surface the portion of the film touching the driveway or parking lot can dry immediately from the hot sun beaming down on the surface, it can flash dry as well leaving water trapped in the middle. These conditions combined with turning the wheels of your car when its not ...moving or possibly maneuvering the car to get into the garage can lead to tire marks. YOU HAVE A GOOD COAT OF SEALER The good news is that you have a good coat of sealer. A product with a good amount of water won't leave marks but a sealer with high solids content, (what is left after the water dissipates) possibly under the above conditions, can. Approximately 90% of the curing process takes place within the first 24 hours after application. The remaining 10% can take up to several weeks. Try to minimize hard turns and turning your tires when the vehicles are not in motion..

Have you seen the weather? Not good for scheduling. Be patient we will get to your driveway, I promise. Thank you!Have you seen the weather? Not good for scheduling. Be patient we will get to your driveway, I promise. Thank you!

And they still walk on it!

How many sets of foot prints will we find?

Wow, always a first for everything. Seal coating a parking lot today and someone dumped a stolen bike in the bed of our line painting truck. Carlisle police was just here and said this happens all the time. Took the bike out of the truck and said their truck will be by to pick up. In the mean time if someone comes along they can take it. Hmmmm